Glossary entry (derived from question below)
Polish term or phrase:
siła laminacji
English translation:
lamination bond strength
Added to glossary by
Frank Szmulowicz, Ph. D.
Aug 17, 2019 13:52
4 yrs ago
2 viewers *
Polish term
siła laminacji
Polish to English
Tech/Engineering
Engineering: Industrial
"Po laminacji skontrolowano siłę laminacji i siłę zgrzewu" - w krótkim opisie procesu produkcji folii laminowanej (powstaje ona w wyniku laminacji dwóch warstw folii).
Proposed translations
(English)
| 2 | lamination bond strength |
Frank Szmulowicz, Ph. D.
|
| 2 | lamination strength |
Darius Saczuk
|
References
| Lamination bond strength (LBS) |
geopiet
|
Change log
Aug 22, 2019 11:10: Frank Szmulowicz, Ph. D. Created KOG entry
Proposed translations
1 hr
Frank Szmulowicz, Ph. D.
United States
United States
Native in Polish
&
English
Works in field
United States
On time, on target, on budget.
Native in: English 
, Polish
Works in: Polish to English, English to Polish, Russian to Polish, and 1 more.
Related KudoZ points
:
179
Selected
lamination bond strength
The lamination bond strength of flexible laminates is determined in accordance with ASTM F904 - essentially the same
https://www.google.com/url?sa=t&source=web&rct=j&url=https:/...
https://www.google.com/url?sa=t&source=web&rct=j&url=https:/...
4 KudoZ points awarded for this answer.
Comment: "Dziękuję :)"
2 mins
Darius Saczuk
United States
United States
Native in Polish
&
English
United States
The Slanguage Buff
Native in: Polish (Variant: Standard-Poland) , English (Variant: US)
Works in: Polish to English, Spanish to English, English, and 4 more.
Related KudoZ points
:
16
lamination strength
Lamination Process - an overview | ScienceDirect Topics
Lamination strength affects the ability of the layers in a lamination to reinforce other layers and strengthen the total structure.
Lamination strength affects the ability of the layers in a lamination to reinforce other layers and strengthen the total structure.
Reference comments
1 day 1 hr
Reference:
Lamination bond strength (LBS)
Siła laminacji N/cal - table on page 15
[0074]
W analogiczny sposób wytworzono laminaty z warstwą kompozytu jak opisano w Przykładzie 7. W dalszej laminacji, na warstwę melaminy naniesiono klej, zawierający Novacote NC 275A i środek katalityczny CA 12 (42,7 i 10,7 % wag. odpowiednio) i 46,6 % octanu etylu. Klej miał 40 % ciała stałego. OTR po laminacji wynosiło 9,5. Siła laminacji > 2 N/cal. - page 16
- https://mojepanstwo.pl/dane/patenty/259525,tytul-wynalazku-l...
-----------
[0048]
Fig. 2 illustrates the lamination bond strength and failure mode for a biaxially oriented polyethylene terephthalate/polyethylene (BOPET/PE) laminate in which BOPET was coated with Primer B, printed, and adhered to the PE substrate with a solventless adhesive (PL 272A/CF72 from Morchem). The primer was applied at coat weights of 0.13, 0.17, and 0.23 gsm. As can be seen, for substrates having ink coverage of 100-200%, the lamination bond strength is greater than 3.5 N/inch.
- https://patents.google.com/patent/EP2900472B1
---------
LBS values from two different areas of the laminated film resulted in 3.3N/inch to 4.5N/inch.
Lamination bond strength of printed patches with lower ink coverage 100-200% were also measured. LBS values resulted in 4.0 ± 0.7N/inch (5 repetitions 3.2-4.9N/inch) at different areas on the laminated film.
LBS values presented quit a high variations indication non-uniformity of the TAP layer.
- https://www.karlville.com/wp-content/uploads/2019/02/CHARTER... - page 4
[0074]
W analogiczny sposób wytworzono laminaty z warstwą kompozytu jak opisano w Przykładzie 7. W dalszej laminacji, na warstwę melaminy naniesiono klej, zawierający Novacote NC 275A i środek katalityczny CA 12 (42,7 i 10,7 % wag. odpowiednio) i 46,6 % octanu etylu. Klej miał 40 % ciała stałego. OTR po laminacji wynosiło 9,5. Siła laminacji > 2 N/cal. - page 16
- https://mojepanstwo.pl/dane/patenty/259525,tytul-wynalazku-l...
-----------
[0048]
Fig. 2 illustrates the lamination bond strength and failure mode for a biaxially oriented polyethylene terephthalate/polyethylene (BOPET/PE) laminate in which BOPET was coated with Primer B, printed, and adhered to the PE substrate with a solventless adhesive (PL 272A/CF72 from Morchem). The primer was applied at coat weights of 0.13, 0.17, and 0.23 gsm. As can be seen, for substrates having ink coverage of 100-200%, the lamination bond strength is greater than 3.5 N/inch.
- https://patents.google.com/patent/EP2900472B1
---------
LBS values from two different areas of the laminated film resulted in 3.3N/inch to 4.5N/inch.
Lamination bond strength of printed patches with lower ink coverage 100-200% were also measured. LBS values resulted in 4.0 ± 0.7N/inch (5 repetitions 3.2-4.9N/inch) at different areas on the laminated film.
LBS values presented quit a high variations indication non-uniformity of the TAP layer.
- https://www.karlville.com/wp-content/uploads/2019/02/CHARTER... - page 4
Something went wrong...